Hydraulic seal for cylinder application

HydraPak offers all the necessary elements for virtually every seal application. Fluorocarbon FKM & Viton® -Rings: Chemical resistant Fluorocarbon FKM -Rings exhibit exceptional resistance to chemicals, oils, temperature extremes, low compression set, low gas permeability and excellent aging characteristics. The specific applications of hydraulic seals are as diverse and numerous as they industries they are found in. Hydraulic seals can be found in construction equipment, agricultural machinery, brake devices, clean rooms, conveyors, mixers, presses, valves, and test equipment. Hydraulic seals are most often found in hydraulic cylinders, the mechanical actuators that convert hydraulic pressure (from oil, water, or another pressurized fluid) into unidirectional force for agriculture and forestry vehicles, construction equipment, and similar mechanisms. If the correct elastomer material is not chosen, the seal will break down when it encounters a corrosive fluid and contamination will occur. Gaskets are used in fluid systems around the end caps of actuating cylinders, valves, and other units. Wiper seal for hydraulic cylinder also known as scraper seals is fitted on the head of the cylinder at the external side and provide a sealing contact to the piston rod. The T-seal comes in both piston (TPO) and rod (TRO) styles. DEPAC’s unique polymer material prevents installation damage thanks to its high elasticity and wear-resistance. UTI with asymmetrical profile of the sealing lips and back-up ring as a gap sealing component. The profile has been designed with a shallow groove to ensure tight contact between the static and dynamic part, even in zero pressure situations. Hydraulic seals are divided into two main groupings: static and dynamic. Buffer seals enhance the function of the rod seal by providing a buffer” against excessive internal fluid pressure. Similarly, in the electronic industry, seals such as EMI shielding gaskets serve to prevent unwanted electromagnetic interference in various devices. Rod Seals often see the highest pressure variation. We can also custom-manufacture a full range of seals, in a full range of materials to meet your exact requirements. Advances in more environmentally friendly hydraulic fluid is causing material compatibility issues with traditional cylinder seal materials. Common end use applications are industrial seals, Air Guns, Paintball Markers, pneumatic applications, and other high dynamic applications. Precision and repeatability over months or years of operation should be a factor in deciding what hydraulic seals to select for your project. Wear rings can be found at both the rod and piston locations within a hydraulic cylinder. General applications include cylinders, forming machines, hydraulic presses, and movable cylinders. And, most of the new seals outperform the previous products. Available in plastic, rubber and PTFE delivers the highest performance in a wide variety of rod seal applications. We offer a wide range of hydraulic seals produced by Italian GUARNITEC. New advances in hydrolysis resistant urethanes assist in solving one of the most common hydraulic sealing application problems. Seals play a critical role in the function of hydraulic systems. Guide rings are designed to prevent two dynamic surfaces within a hydraulic system from rubbing together. HydraPak’s cutting edge vulcanizing technology produces high quality seals with large diameter capabilities for your demanding applications. KAF’s computer-designed positive lip wipes foreign bodies away from the seal face. Rod seals are considered the most critical element of a cylinder sealing system. There are many types of hydraulic seals out there and they come in a variety of shapes and sizes. Rod seals specifically work by preventing external fluid leakage from the cylinder. Each ring is individually manufactured and provides excellent performance, as a supporting element, to both piston, rod and face seals that are generally found in static or dynamic applications. The following are the applications of hydraulic seals in various industries. A wiper seal can be installed to prevent seal failure and system breakdown.

In this case, a combination of PTFE composite seals and wipers would be used to ensure superior sealing performance and a long service life. Cutting edge technologies include multiple sealing lip systems, shock-load resistance, low friction and ultra-dry capability. The distinctive types of sealing positions and directions that are used for hydraulic and pneumatic seals are axial seals, rod or internal seals, external or symmetric seals and piston seals. There are many pieces of equipment that require precise motion control and sealing within the medical industry, and with ever-increasing technological developments, the demand for specialist sealing materials and products will only grow. The lip can also scrape any contaminants from the rod surface, giving them the title of double-edged wiper seals”. The four-lobed design provides twice the sealing of a standard -ring, but requires less squeeze to maintain an effective seal. These wipers provide excellent performance on rods or rams in hydraulic and pneumatic applications. It should also be noted that while all hydraulic seals are important, not every single one is equally important. Allied Metrics is a leader among hydraulic cylinder seal manufacturers. Wear Rings are used to retain the piston centralised. No. 3 – Chemical breakdown of the seal material is most often the result of incorrect material selection in the first place, or a change of hydraulic system fluid. Lip seals are made of many different elastomeric materials, including polymers, plastics and rubbers, and they are effective in providing a seal in revolving machinery and equipment. The wiper is not a pressure sealing element. For the vast majority of hydraulic applications, hydraulic seals are a non-optional component; it simply isn’t practical or reasonable to manufacture and use systems which do not use a number of hydraulic seals. Hydraulic cylinder Piston seals are a variation of the rod seals available as single-acting or double acting based on the capability to seal dynamic pressure either on one side or both sides. Wiper seals scrape dirt, chips or moisture from the piston rods as it them into the retract to the system. This allows to match the seal to many different types of cylinders, without making quality and price compromises. They are used to prevent the hydraulic fluid from flowing across the piston, from leaking past the interface between the rod and the head and to keep it from leaking to the outside of the cylinder. RTA Rod Seals: These Single Acting seals are used in hydraulic cylinders that have small groove dimensions. Make sure you confirm all relevant compliance issues for general use of hydraulic seals in your application, as well as identifying any relevant standards based on industry, application, environment, etc. A lubricant in the space between the sealing lip proper (primary lip) and additional (secondary) lip can reduce wear and delay corrosion. Hydraulic seal manufacturers generally fabricate seals from rubber or metal, and in some cases leather or felt. We supply wipers, rod u-seals, rod buffer seals, piston seals, wear rings, U-seals, vee packings, individual vee rings & adaptors, piston cups, T seals, piston assemblies, piston seal assemblies, piston rings, wiper rings, oil seals, ‘’ Rings, backup rings, quad rings & retainer rings, as well as bushes, teflon bushes & self aligning bearings for the cylinder eyes. Given the working conditions found in many of these industries, these seals need to be built to withstand high pressure. American Seal & Packing Loaded Lip Seals are molded from 92 Durometer Urethane with a 70 Durometer Nitrile energizer. Toughest of the elastomers used for -rings, characterized by high tensile strength, excellent abrasion resistance, and tear strength. Scrapers or Wipers scrape dirt, foreign particles, chips or moisture from the piston rods as they retract into the cylinder, preventing contamination. Piston seals are dynamic hydraulic seals that are used to prevent the passing of any fluid beyond the piston as the system pressure forces the piston down the cylinder.

Hydraulic seals are crucial in machinery equipment. SSP Seals’ stocks a wide range of hydraulic and pneumatic seals to meet the various needs of industrial applications in terms of design, manufacturing, and application performance. These seals create a tight fit by allowing the passage of reciprocating ramrod through the inner bore of the seal. Bill of Material – A list of all materials needed to manufacture a certain product. For use as an anti-extrusion device in dynamic -ring applications where there is high pressure or excessive gland clearance. Typically called out as “cast” urethane -rings, these parts perform well in quick disconnects, high pressure hydraulic and water applications and in nail or riveting equipment. Wipers work in conjunction with rod seals to protect a system and keeping it free from dirt, mud, water, and other contaminants. This seal design is offered as a rod or piston seal and provides outstanding performance in both hydraulic and pneumatic applications. Snap-in wiper designed to scrape outside contaminants off cylinder rods in medium to heavy-duty hydraulic cylinders. Chesterton” hydraulic seal manufacturers, often referred to as back-up rings, are designed to prevent seals or -rings from extruding into equipment clearances while under pres- sure. To do so would require a combination highly precise machining, unusual materials, low stress on components, and specific fluids—and even then, such a system would fail relatively quickly. Dynamic Seals – Dynamic seals are used when axial or radial movement is required under pressure. These -rings are now standard for systems where the operating temperatures may vary from -65 °F to +275 °F. Contact GBSA today to discuss hydraulic wipers specific to your application. Loaded Lip Seals are very versatile and can be used as rod seals or piston seals. We enjoy the challenge of providing solutions to the most difficult seal applications. Than the inner lip in order to be used for piston applications. KAF’s unique polymer material features high wear resistance and elasticity, thus preventing the damage that commonly occurs during installation. In hydraulic applications, each of the pneumatic seals plays a critical role in keeping the system running efficiently. Lip Seals are for use in rotary applications up to 150 psi in corrosive and abrasive environments. Adjustable packing used in telescoping cylinders and many types of older hydraulic equipment. Within the aerospace industry, custom seals such as silicone sealant strips serve to seal various hydraulic components within aircraft systems. Back-up rings are not seals themselves. Double-acting piston seals are able to concentrate pressure on both sides of a piston, thus driving the ram that the piston is typically attached to. In contrast to the dynamic types of piston seals just described, static piston seals seal the gap between the piston and the piston rod (rather than the piston and the cylinder bore). The hydraulic environment is very extremely tough on seals which must withstand enormous amounts of pressure as well as extreme temperatures and often unbalanced forces and extreme forces inside a cylinder. Various types of seals are used in applications that have constantly moving equipment, such as the rotating or reciprocating shafts and cylinders that are an essential part of hydraulic and pneumatic systems. One basic hydraulic cylinder system may make use of hydraulic cylinder seals , lip seals , hydraulic piston seals, wear rings, scrapers, and more to function effectively. If you have plans for upgrades or expansion of operations in the future, this may impact the best solution for hydraulic seals today. Parker offers a complete range of both activated and non-activated PTFE piston seals and rings for hydraulic and pneumatic applications. Piston seals may also be known as Piston Packing. ISO 9001:2015 manufacturer & designer of mechanical seals, hydraulic seals & pneumatic seals. The seal is designed with initial radial interference to effect low pressure sealing. Piston seals are used to prevent pressurized fluid from leaking across the cylinder head while system pressure pushes the piston down the cylinder bore.

Hydraulic seal manufacturers create many products that are application specific and specially designed to prevent leaks under very particular circumstances. A hydraulic seal is used to contain fluids and maintain the hydraulic pressure (piston seal, rod seal, back-up ring), to stop the inlet of impurities and to preserve the lubricating film on the rod (wiper seal) and to resist any deformation under a radial load by guiding the piston and rod (wear ring and guide strip). When selecting the best seals for your hydraulic ram, both at OEM or repair stage, it’s important to consider the parameters of the application and the operating conditions. Hydraulic applications can be challenging for seals. Thousands of -ring compounds have been formulated for specific applications. All of the metal materials used to create seals may be plated or galvanized for added oxidation protection and strength. The most common place to find these seals, however, is in a hydraulic cylinder. The piston seals acts as a pressure barrier and prevent fluid from passing the piston. A leading manufacturer of moulded rubber seals, elastomer components and custom engineered solutions; manufactured to the highest quality standards, in medium-to-high volumes, to a diverse range of industries around the globe. Rod seals are used in mobile hydraulic, agricultural, and general industrial applications. Also, these seals protect the rod seals from contaminants. As an application user, you must review the user manual provided along with the purchase of hydraulic seals. Designed for light duty applications where style WD wipers are not required. We offer almost 16,000 hydraulic seals to choose from. Our polyurethane u-cups come in symmetrical and double-lip rod and piston asymmetrical styles that maintain a comprehensive water resistant seal. These flaws are often capable of preventing satisfactory -ring performance under the variable operating pressures of aircraft systems; therefore, -rings should be rejected for flaws that affect their performance. The -ring is considered a universal sealing device. T-seals: These seals can be designed in both rod and piston styles to prevent extrusion and spiraling. Conventional seals swell as they absorb hydraulic fluid. Sometimes called loaded-lip U-cups, B-style polypack, and lip seals, these seals have a beveled edge with a symmetrical cross section. Hydraulic seals are generally relatively soft, non-metallic rings captured in groove or fixed in a combination of rings, forming a seal assembly, to block or separate fluid in reciprocating motion applications. Piston seals are important for controlling the motion of a cylinder. Deep-Z rod seals are a type of symmetrically loaded U-cup seal. To better understand our hydraulic seal capabilities unique to your application, please complete our contact form or send an email to gbsa@ with a drawing of your part. Applications: General purpose sealing, Air Tools, Hydraulic fluids, Petroleum based oils, fuels, L.P. gases, Cold Water, Silicone greases and oils, Di-ester base lubricants (MIL-L-7808), Ethylene glycol base fluids (Hydrolubes) and Hydraulic Fluids and in static and dynamic applications. We supply 100s of styles and 1000s of sizes of hydraulic seals in inch and metric sizes. Wipers: Commonly known as scraper seals, these wipers help the ingress of external contaminants, which can damage the sealing system, as well as the application machinery. The T-shaped design prevents spiral failure that occurs with -rings used in cylinders with long strokes. This grants for equal and even wear, and stress allotment on the seals. Hydraulic seals are produced in most cases like any gother mechanical seal or component made of polymers. Rely on hydraulics or pneumatic seals. Polytetrafluoroethylene (PTFE) -rings: Temperature & Chemical Resistant PTFE is a popular -Ring material which is White in color. Are relatively soft, non-metallic rings captured in a groove or fixed in a combination of rings, to form a seal assembly, to block or separate fluid in reciprocating motion applications. 7. Durability: Hydraulic seals are designed to have long service lives.

This reduction in squeeze means less friction and improved seal life, and because parting lines are between the lobes, away from the sealing surface, problems of leakage associated with -rings is virtually eliminated. WRB Wiper Seals: These Medium Duty scraper seals have a special lip that help prevent moisture and dirt from accumulating on the rod. If the clearance gap between the sealing surface and the groove corners is too large or if the pressure exceeds the deformation limits of the -ring material (compound) , the -ring will extrude into the clearance gap, reducing the effective life of the seal. Manufacturer of standard and custom hydraulic seals. GUARNITEC use very high quality polyurethane compounds and other materials in their production. Many hydraulic seal suppliers have the same exact seals that are used in most hydraulic cylinders and can easily cross reference or match up a replacement. When the wiper seals are not secured or fail, it can cause component failure in a fluid power system that leaves other pieces of the operation open to serious damage. For heavy-duty hydraulic cylinders. You’ve discovered -Rings, Inc. Despite the greatest of care, conventional seals are highly vulnerable to damage of the sensitive sealing faces during installation. 3. Leakage control: The use of hydraulic seals can prevent any leakage, thus reducing any chances of downtime or repair. The specific operations of a hydraulic seal differ slightly depending on where the seal is located with regard to the hydraulic cylinder. Hydraulic seals should be a fairly high priority for checkups by your maintenance team. T-seals are composed of a sealing element with two split back-up rings. Industries hydraulic seals serve include aerospace manufacturing, agriculture, automotive manufacturing, chemical processing, defense contracting, food processing, marine products manufacturing, medical and pharmaceutical products development, nuclear power, pulp and paper, and waste disposal. Rods seals, piston seals, wipers, guiding rings and statics seals on stock. Rod Seals: These hydraulic seals are used to prevent fluid leakage within cylinder. Static seals that installed directly into the housing or glands of a system, rod seals are designed to provide dynamic sealing pressure while the piston rod is in dynamic motion. The external lip scrapes foreign matter from the rod, and the other lips act as an effective pressure seal in low pressure applications. Furthermore, purchasers of hydraulic seals should take note of vacuum rating, working temperatures, chemical compatibility (between the seal and the hydraulic fluid), highest and lowest working speed, and minimum and maximum pressure. Because System Seals specializes in custom designs and sizes, the company is a perfect fit for the cylinder repair industry, and it continues to save its customers millions of dollars each year. Asymmetrical seals are so designed that in the installed state they contact the static surface with an initial stress over the whole axial width in order to achieve a sufficiently firm seating in the groove. Wipers are designed to prevent any contamination to the system by external media during stroke movement of the cylinder. We will work with you to ensure our rod seal designs meet your application requirements. U-ring packings (AN6226) and U-cup packings are used in brake assemblies and brake master cylinders. FKM – When applications that require better chemical resistance and higher temperatures up to 400°F (FKM seal elements) with two PTFE or PEEK back-ups are recommended. Hydraulic rod seals are installed in a groove that has been machined in the cylinder housing to provide a tight seal against the piston shaft. These anti-extrusion rings are available in various extrusion-resistant materials and are located on the back-side or low pressure side of the sealing element they are supporting. Sealing Devices has experience with custom aerospace seals, and offers many items including geltek silicone sealant strips from stock. In addition to keeping fluid from leaking, seals also help keep dirt and contaminants out of the cylinder, which extends the lifespan of the cylinder.

Leave a Reply

Your email address will not be published. Required fields are marked *